material |
premium flooring grade particleboard (C4 grade waterproof and antifungal |
| dimensions |
600mm x 600mm x 22mm thickness |
| processing |
drilled with 16 screw holes and 4 locating sockets to engage over pillars on the base moulding;
printed with the underlying duct pattern to facilitate tile alignment and location of penetrations. |
| weight |
5.6kg |
The Base |
| material |
injection moulded controlled-rheology polypropylene co-polymer |
| dimensions |
56mm high x net 601mm x 601mm face to face (610mm x 610mm overall including projecting interlocks)
upper and lower power cableways 115mm x 26mm
upper and lower telecommunications cableways 115mm x 26mm
centre trunk cableways 155mm x 26mm |
| weight |
1.48kg |
| screws |
10g x 45mm; coarse pitch (10 threads per inch); bugle head, phillips drive; yellow zinc chromate finish |
| bedding |
high-build styrene butadiene rubber (SBR) gun-applied adhesive |
The Assembled Tile Module |
| assembly |
the deck is attached to the base using six screws: one at each corner and two in the centre area in diagonally opposite pillars. Blank holes are available at each pillar to fasten edges of cut tiles. |
| installation |
the tiles are laid so that the bases abut each other and interlock to form a grid 601mm x 601mm. This results in a gap of approximately 1mm between deck panels which eases their removal and replacement. The over-module spacing reduces the likelihood of gaps at wall abutments. |
| coverage |
2.77 tiles/m2 |
| weight |
7.1 kg per module; 19.7 kg/m2 |